Specifications

DMC-30SC Preamplifier Technical Data
Input Compliment: 7 inputs - 5 normal, 1 balanced (optional) , tape monitor
Output Compliment: 3 outputs - normal, balanced (optional), tape
Control Compliment:
    Output Attenuation Motorized fader conductive plastic, modified log taper
    Output Balance Relay attenuator system with center position bypass
    Mute Switch 0, -20 dB attenuation
    High Level Trim 0 and -12dB attenuation for all high level inputs
Mode Switches: Stereo/Mono, Absolute Phase
Input Select: 6 position and  Tape Monitor
Output Level Display               50 step LED
Output Balance Display 50 step LED
Input Impedance 15K ohms
Output Impedance 100 ohms
Recording Amplifiers:
    Input Impedance 11K ohms, 100 ohms minimum load
    Output Impedance 2K ohms
Protection Circuit:
    Protection Mode: DC offset, oscillation
    Method: Crowbar output relays
    Sensitivity: 20 mV continuous DC
    Recovery: Approx. 10 seconds
    Chassis Temperature: Internal 48 deg. Celsius @ 25 deg. room temp
Frequency Response: DC to 1 MHz -.10dB
DC to 2.5 MHz -3 dB
Any level to 36 V RMS
Slew Rate: 1000 V/us or greater
Rise Time: 70 ns
Distortion: Less than .005% THD and IM
Crosstalk: Greater than 92dB
Noise: 105 dB A Weighted, ref 100 mV @ 1 KHz
Output Voltage: 1.6 VRMS, 100 V peak to peak maximum
Output Current: 1 Amp maximum per channel, balanced out
Gain Options: 15 dB, 21 dB
Remote Control:  Operates all front panel functions, level and balance rates,
display brightness and system reset
DMC-30SC Mechanical Specifications
Dimensions: 48.3 cm (19") W, 10.4 cm (4.1") H, 31.1 cm (12.25") D
Weight: 13 KG. (28 lbs) net.
All information and specifications provided herein are subject to change owing to the evolutionary nature of Spectral designs and technology.
All Spectral products are covered by a three-year limited warranty for parts and labor.

 

All files are copyright 2016 by Spectral Audio, Inc.